Konica Minolta A034012 用户手册
Maintaining the Printer
7-3
Do not leave the printer’s covers open for any length of time, especially in
well-lit places; light may damage the imaging cartridge.
well-lit places; light may damage the imaging cartridge.
Do not open the printer during printing.
Do not tap media stacks on the printer.
Do not lubricate or disassemble the printer.
Do not tilt the printer.
Do not touch the electrical contacts, gears, or laser devices. Doing so may
damage the printer and cause the print quality to deteriorate.
damage the printer and cause the print quality to deteriorate.
Keep media in the output tray at a minimum level. If the media is stocked
too high, your printer may experience media misfeeds and excessive
media curl.
too high, your printer may experience media misfeeds and excessive
media curl.
Keep the printer level to avoid
toner spillage.
toner spillage.
When lifting the printer, grasp
the areas shown in the figure.
the areas shown in the figure.
Before moving the printer,
remove the dust cover, and fold
up Tray 1.
remove the dust cover, and fold
up Tray 1.
If the optional lower feeder unit,
attachment and duplex option
are installed, remove them and
move them separately.
attachment and duplex option
are installed, remove them and
move them separately.
If you get toner on your skin, wash it off with cool water and a mild soap.
CAUTION
If you get toner in your eyes, wash it out immediately with cool water
and consult a doctor.
and consult a doctor.
Make sure any parts removed during cleaning are replaced before you
plug in the printer.
plug in the printer.
15.1 kg
33.3 lbs