Konica Minolta A034012 用户手册
Duplexing
5-21
Duplexing
Select paper with high opacity for duplex (double sided) printing. Opacity
refers to how effectively paper blocks out what is written on the opposite side
of the page. If the paper has low opacity (high translucency), then the printed
data from one side of the page will show through to the other side. Check
your application for margin information. For best results, print a small quantity
to make sure the opacity is acceptable.
Duplex (Double sided) printing can be done automatically with the duplex
option installed and selected.
refers to how effectively paper blocks out what is written on the opposite side
of the page. If the paper has low opacity (high translucency), then the printed
data from one side of the page will show through to the other side. Check
your application for margin information. For best results, print a small quantity
to make sure the opacity is acceptable.
Duplex (Double sided) printing can be done automatically with the duplex
option installed and selected.
Note
Only Letter/A4 plain paper, 60–90 g/m
2
(16–24 lb bond) can be
autoduplexed. See “Print Media” on page 5-2.
Duplexing envelopes, labels, postcards, thick stock, or letterhead is not
supported.
supported.
How do I autoduplex?
You should verify that the duplex option is physically installed on the printer to
successfully duplex the job.
Check your application to determine how to set your margins for duplex
printing.
The following Binding Position settings are available.
successfully duplex the job.
Check your application to determine how to set your margins for duplex
printing.
The following Binding Position settings are available.
If “Short Edge” is selected, the pages will be laid out to flip
at the top.
at the top.
If “Long Edge” is selected, the pages will be laid out to flip
at the sides.
at the sides.
1
3
1
2
1
1
1
1
1
2
3