Ricoh 70eI92 用户手册
3-18
Paper Handling
Ordered Sets
Using the OCP or the WEB you can define an ordered set by specifying the number of
pages (12 max.) in the set and the paper source tray(s) that contain the ordered set
pages. The printer will support input tray cascading for ordered sets based on paper size
and media type
pages (12 max.) in the set and the paper source tray(s) that contain the ordered set
pages. The printer will support input tray cascading for ordered sets based on paper size
and media type
PCL tray grouping is also supported for ordered sets. All trays in a group must have the
same configuration to allow cascading. Trays not included in the group must have a
different configuration.
same configuration to allow cascading. Trays not included in the group must have a
different configuration.
In the event that a paper jam, job cancellation, or other recoverable printer error occurs
while printing ordered sets, the printer will prompt you to clear the paper path. When
the paper path is clear, press Continue on the OCP. The printer will automatically
remove the remaining sheets of the ordered set to the sample tray, reprint the set(s) that
were in the paper path, and complete the job.
while printing ordered sets, the printer will prompt you to clear the paper path. When
the paper path is clear, press Continue on the OCP. The printer will automatically
remove the remaining sheets of the ordered set to the sample tray, reprint the set(s) that
were in the paper path, and complete the job.
Some examples of ordered sets are:
Tabs
NCR
Prenumbered pages
Special forms
NOTE
:
The printer can support only one ordered set size at a time; therefore, make
sure the paper size and media type for each tray in the cascade are the same.
sure the paper size and media type for each tray in the cascade are the same.
NOTE
:
For more information on PCL Tray Grouping refer to the Web Utilities
Guide and/or the PCL Programming Guide.
Guide and/or the PCL Programming Guide.