Ricoh MP C4500 用户手册
Document Server
164
3
Changing number of print copies while printing is in progress
Following describes the procedure for changing the number of print copies after
printing is started.
printing is started.
Important
❒ This feature is enabled when the sort function is selected in the printing conditions.
A
Press the {Clear/Stop} key.
B
Press [Change Quantity].
C
Enter the number of print copies anew from the number keys.
D
Press the {q} key.
E
Press [Continue].
Printing will be resumed.
Printing will be resumed.
Note
❒ The range of print copies enterable in step
depends on the timing of your
pressing the {Clear/Stop} key.
Sample Print
When print copies are massive, you can print a single copy in advance to check appro-
priateness of the printing order of the selected documents and the printing conditions.
priateness of the printing order of the selected documents and the printing conditions.
Important
❒ This feature is enabled when the sort function is selected in the printing conditions.
A
Select the document to be printed.
When a password is set, enter it and then press [OK].
B
Press the {Sample Copy} key.
Only one copy will be printed.
Only one copy will be printed.
C
Press [Continue].
Printing will be resumed.
Printing will be resumed.