Sharp MXC250 用户手册

When an error occurs during a transaction, an alarm will sound and a message will appear in the display.
If one of the following messages appears, follow the instructions in the table.
If another messages appears, see "INDICATORS AND DISPLAY MESSAGES" (p.151).

The machine has a self-diagnostic function that automatically stops operation if a problem occurs in the machine. If
a problem occurs in fax mode, the following display appears.

XXXXXX
Line error.

An error prevented completion of the 
transaction.

Try the transaction again.

–

Call for service.

             code:xx xx.

Turn off the power and then turn it back on. If the error is not cleared, note the 2-digit main code
and the 2-digit sub-code and then contact your dealer.

SENT                                  xx%
No.001                             P-xxx

This appears when a direct transmission ends ("xx" indicates the number of pages).

READING                        xx%
No.001                          P-xxx

The original is being scanned into memory (during memory transmission).

Stand-by.                       100%
22 AUG FRI 10:25

The machine is in the standby state.

ENTER DIAL #

This appears when the [SPEAKER] key has been pressed.

Main code

 Sub code