Sharp MXC250 用户手册
140
SCANNER FUNCTIONS
5
Connect the USB memory device to the machine.
6
Press the [COLOR START] key or
[BLACK & WHITE START] key.
[BLACK & WHITE START] key.
Scanning begins.
If scanning is completed normally, "Complete." is
appears briefly and then the display returns to the
base screen.
If scanning is completed normally, "Complete." is
appears briefly and then the display returns to the
base screen.
6
Press the [COLOR START] key or
[BLACK & WHITE START] key.
[BLACK & WHITE START] key.
Scanning begins.
7
If you have another page to scan,
change pages and then press [COLOR
START] key or [BLACK & WHITE
START] key.
change pages and then press [COLOR
START] key or [BLACK & WHITE
START] key.
• Repeat this sequence until all pages have been
scanned.
• If no action is taken for one minute (the
[START] key is not pressed), scanning
automatically ends and transmission begins.
automatically ends and transmission begins.
8
When the final original page has been
scanned, press the [READ-END] key
( ).
scanned, press the [READ-END] key
( ).
Open the document feeder and remove the
document. When the original is removed or any
key operation is performed, the display returns to
the base screen.
document. When the original is removed or any
key operation is performed, the display returns to
the base screen.
If a USB memory device is inserted into the machine prior to step 4, the following screen will appear.
Instead of performing steps 3 and 4, you can select "Scan to the memory device" with the [
] or [
] key in the
above screen and press the [OK] key to select the USB memory device as the destination.
Note
Using the document feeder
Using the document glass