Sharp MXC250 用户手册

When "Polling Security" is enabled, use this setting to 
program (or delete) the fax numbers of the machines 
that are allowed to poll your machine. Programmed fax 
numbers are called passcodes. Up to 10 fax numbers 
can be programmed. To check the programmed 
numbers, print the "List Print" (p.181).
If you make a mistake, move the cursor to the mistake 
with the [

] or [

] keys and enter the correct number.

System settings for the scanner function are explained 
below.
Select the [Scanner] to configure the settings.

Select whether or not scanning from a computer and 
scanning from the machine are disabled when a USB 
connection is used.
Default setting is "No" (disabled).

This is used to change the default settings for the 
original size, resolution, format, and scanning 
exposure in B/W mode. (For details, see "STORING 
SCANNING SETTINGS" (p.130).)
•

For details on each setting, see the pages below.
"Original Size Enter" (p.130)
"Resolution"

"Format"

"Mono2/Grayscale"

To clear a passcode number, follow these 
steps:
(1) Select "Delete" and then press the [OK] 

key.

(2) Enter the control number that identifies 

the number you wish to clear, and then 
press the [OK] key.

(3) Select "Delete" with the [

] or [

] key 

and then press the [OK] key.