Sharp MXC250 用户手册

This feature is used to send a fax to multiple destinations in a single operation. The original to be transmitted is 
scanned into memory and then successively transmitted to the selected destinations. This feature is convenient for 
such purposes as distributing a report to company branches. Up to 100 destinations can be selected. 
When transmission to all destinations has been completed, the document is automatically cleared from memory.

The destination selection screen appears. To clear a mistake when entering a full number with the numeric 
keys, press the [C] key to clear one digit at a time. A destination selected with a Speed Dial number, or group 
dial is indicated by an icon and a number. To clear an entry, press the [C] key.

After entering a full number with the numeric keys, press the [OK] key to complete the entry. If you pressed an 
auto-dial key in step 1, it is not necessary to press the [OK] key. You can immediately press another auto-dial 
key for the next destination. Repeat steps 1 and 2 to select the remaining destinations.

• If you frequently use broadcasting to send faxes to the same group of destinations, it is convenient to program 

those destinations into a group dial. The procedure for programming group dials is explained on p.103.

• When a group dial is used to send a fax, the fax is broadcast (transmitted) to the destinations programmed in 

the group dial. For example, if five destinations are programmed in a group dial and the key is pressed for a 
broadcast transmission, the broadcast transmission will have five destinations.

• If you need to delete a number for which entry has already been completed by pressing the [OK] key, use the 

[

] or [

] key to select the number and then press the [C] key.

• If the selected destinations exceed the display range of the message screen, press the [

] or [

] key to scroll 

through and check the destinations.

• Destinations can also be selected using the address directory and the [REDIAL] key. 

Note, however, that the [REDIAL] key can only be used to select the first destination (it must be used before 
any other destinations are selected).

• If you use two group dials that have 50 stations each, the total number of destinations entered will be 100.

To cancel a broadcast transmission when selecting destinations, press the [CA] key. To cancel transmission after 
the transmission procedure has been completed, follow the procedure in "CANCELING A FAX TRANSMISSION" 
(p.93).

Beep

The document is scanned

into memory

Reception

Reception

Reception

Destination A

(recipient)

Successive

transmission

Beep

Beep

Destination B

(recipient)

Destination C

(recipient)

Sender

Select the broadcast 

transmission function.