Ricoh 1600L/2000L 用户手册
Settings You Can Change with User Tools
29
3
❖ Energy Saver Timer
The machine automatically enters Low Power mode automatically after a job
is finished, and the selected time elapsed.
is finished, and the selected time elapsed.
Note
❒ Default: 1 min.
❒ The time can be set from 1 to 240 minutes, using the number keys.
❒ Energy Saver may not work when error messages appear.
❒ The machine automatically prints any fax or printer data received while in
❒ The time can be set from 1 to 240 minutes, using the number keys.
❒ Energy Saver may not work when error messages appear.
❒ The machine automatically prints any fax or printer data received while in
Energy Saver mode.
❖ System Auto Reset Timer
The System Reset setting automatically switches the screen to that of the func-
tion set in Function Priority when no operations are in progress, or when an
interrupted job is cleared. This setting determines the system reset interval.
See p.25 “Function Priority”.
tion set in Function Priority when no operations are in progress, or when an
interrupted job is cleared. This setting determines the system reset interval.
See p.25 “Function Priority”.
Note
❒ Default: On, 60 sec.
❒ The time can be set from 10 to 999 seconds in 1 second increments, using
❒ The time can be set from 10 to 999 seconds in 1 second increments, using
the number keys.
❒ When the set time has passed, the control panel returns to the menu that
was displayed before the {User Tools/Counter} key was pressed.
❖ Copier Auto Reset Timer
Specify the time to elapse before copier modes reset.
Note
❒ If [Off] is selected, the machine does not automatically switch to the user
code entry screen.
❒ Default: On, 60 sec.
❒ The time can be set from 10 to 999 seconds, using the number keys.
❒ The time can be set from 10 to 999 seconds, using the number keys.
KirC3L_zen_AE-F1_FM.book Page 29 Friday, March 31, 2006 2:08 PM