Sharp MX-2600N 用户手册
7-107
Receiving Date & Time Print
Enable this setting to have the date and time of
reception printed.
Select [Inside the Received Image] or [Outside the
Received Image] for the position where the date and
time is printed.
When [Inside the Received Image] is selected, the date
and time of reception is printed on the received image.
When [Outside the Received Image] is selected, the
received image is reduced and the date and time of
reception is printed in the blank area that results.
reception printed.
Select [Inside the Received Image] or [Outside the
Received Image] for the position where the date and
time is printed.
When [Inside the Received Image] is selected, the date
and time of reception is printed on the received image.
When [Outside the Received Image] is selected, the
received image is reduced and the date and time of
reception is printed in the blank area that results.
A3 RX Reduce
When an A3 size fax is received, this function reduces
the fax to ledger (11" x 17") size.
the fax to ledger (11" x 17") size.
Fax Output Settings
These settings are used to select the number of copies
and output tray for received faxes. When a finisher is
installed, the finisher tray can be selected as the output
tray and stapling can be selected.
and output tray for received faxes. When a finisher is
installed, the finisher tray can be selected as the output
tray and stapling can be selected.
Output tray
Select the output tray for received faxes.
Select the output tray for received faxes.
Number of Prints
Set the number of copies of received faxes that are
printed to any number from 1 to 99.
Set the number of copies of received faxes that are
printed to any number from 1 to 99.
Staple Position
When a finisher is installed, set the position at which
received faxes are stapled.
When a finisher is installed, set the position at which
received faxes are stapled.
Paper Size
When a finisher is installed, select the paper used for
printing of received faxes.
When a finisher is installed, select the paper used for
printing of received faxes.
Use this setting to specify whether reception from a
stored number is to be allowed or rejected.
stored number is to be allowed or rejected.
[Outside the Received Image] cannot be selected for
the reception date and time print setting when "
the reception date and time print setting when "
" (page 7-106) is not enabled.
When this setting is enabled, ledger (11" x 17") size
faxes are also reduced.
faxes are also reduced.
• This setting can only be used when the [Multiple Set
Print] and [Staple] checkboxes are selected
in
"
" (page 7-100).
• The maximum number of sheets that can be stapled
is 50. (When the paper is oriented horizontally, the
maximum number of sheets that can be stapled is
30.)
maximum number of sheets that can be stapled is
30.)
Allow/Reject Number Setting
Item
Description
Reject
Reception
Reception
Reject reception from the stored number.
Allow
Reception
Reception
Allow reception from the stored number.
All Invalid
Even if numbers have been stored,
disregard the numbers and allow
reception from all numbers.
disregard the numbers and allow
reception from all numbers.
Add New
Store a new number for which allow or
reject will be specified (maximum of 50
numbers).
Enter the number (maximum of 20 digits)
and touch the [Store] key.
reject will be specified (maximum of 50
numbers).
Enter the number (maximum of 20 digits)
and touch the [Store] key.
Registration
Number List
Number List
A list of the stored numbers can be
displayed.
A number can be selected in this screen
to delete it from the list.
displayed.
A number can be selected in this screen
to delete it from the list.
When no numbers have been stored for allow/reject
specification, no keys other than [Add New] can be
selected.
specification, no keys other than [Add New] can be
selected.