Sharp MX-M232D 用户手册

BEFORE USING THE MACHINE

Document cover (when installed)

Open to make a copy from the document glass.

Side cover

Open to remove misfed paper.

Side cover handle

Pull to open the side cover.

Bypass tray guides

Adjust to the width of the paper when using the
bypass tray.

Bypass tray

Special paper (heavy paper or transparency film)
can be fed from the bypass tray.

Bypass tray extension

Pull out when feeding large paper such as A3 and
B4 (11" x 17" and 8-1/2" x 14").

Toner cartridge lock release lever

To replace the toner cartridge, pull out the toner
cartridge while pushing on this lever.

Toner cartridge

Contains toner.

Document feeder tray (when the SPF/RSPF is
installed)

Place the original(s) that you wish to scan face up
here. Up to 40 sheets can be placed.

Original guides (when the SPF/RSPF is
installed)

Adjust to the size of the originals.

Feeding roller cover (when the SPF/RSPF is
installed)

Open to remove misfed originals.

Right side cover (when the SPF/RSPF is
installed)

Open to remove misfed originals.

Fusing unit release levers

To remove the paper misfed in the fusing unit, push
down on these levers and remove the paper.

Roller rotating knob

Rotate to remove misfed paper.

Exit area (when the SPF/RSPF is installed)

Originals exit the machine here after
copying/scanning when the SPF/RSPF is used.

Photoconductive drum

Images are formed on the photoconductive drum.

Fusing unit paper guide

Open to remove misfed paper.

The fusing unit is hot. Do not touch
the fusing unit when removing
misfed paper. Doing so may cause a
burn or injury.

Do not touch the photoconductive drum
(green portion) when removing the misfed
paper. Doing so may damage the drum and
cause smudges on copies.

The model name is on the front cover of the
machine.

Warning

Caution

Note