Sharp AL-1644 用户手册
21
2
Chapter 2
COPY FUNCTIONS
This chapter explains basic copying functions such as normal copying, reduction or enlargement, and exposure
adjustment.
adjustment.
NORMAL COPYING
This section explains how to make a regular copy.
If "Auditing mode" has been enabled (p.43), enter your 3-digit account number.
If "Auditing mode" has been enabled (p.43), enter your 3-digit account number.
Copying from the document glass
1
Open the document cover/SPF, and
place the original.
place the original.
Place the original face
down on the document
glass. Align it with the
original size scale.
down on the document
glass. Align it with the
original size scale.
2
Close the document cover/SPF.
3
Press the [ORIGINAL SIZE ENTER]
key (
key (
) and select the original size.
When the original size is
selected, the tray with the
same size of paper is
automatically selected.
(Two-tray model only)
selected, the tray with the
same size of paper is
automatically selected.
(Two-tray model only)
● Make sure that the PAPER SIZE indicator lights up. If
the indicator is not lit, no tray has the same size of
paper as the original. Load paper of the required size
in a tray, or select the bypass tray with the [TRAY
SELECT] key (
paper as the original. Load paper of the required size
in a tray, or select the bypass tray with the [TRAY
SELECT] key (
) and copy from the bypass tray.
● The bypass tray must be manually selected.
● To copy on paper of a different size than the original,
select the paper with the [TRAY SELECT] key (
).
● If the ORIGINAL SIZE indicator is blinking, rotate
the original so that it is the same orientation as
blinking ORIGINAL SIZE indicator.
blinking ORIGINAL SIZE indicator.
4
Set the number of copies.
5
Press the [START] key (
) to begin
copying.
The copy is delivered to
the paper output tray.
the paper output tray.
An original up to A3 can be placed on the
document glass.
document glass.
Note
• The paper output tray can hold up to 250
sheets of paper.
• About one minute after copying ends, "Auto
clear" activates and restores the copy
settings to the initial settings. (p.15) The
setting for "Auto clear time" can be changed
in the user programs. (p.38)
settings to the initial settings. (p.15) The
setting for "Auto clear time" can be changed
in the user programs. (p.38)
• Press the [CLEAR] key (
) to stop
copying in the middle of a run.
ENTER
ENTER
A3
A4
A4
A5
B4
A4
A4
A5
B4
XTRA
Note
AL-1633_1644_EX.book 21 ページ ２００３年１０月２３日 木曜日 午後８時２１分