Sharp AR-M201 用户手册
TROUBLESHOOTING AND MAINTENANCE
75
8
3
Gently pull the toner
cartridge out while pressing
the lock release lever.
cartridge out while pressing
the lock release lever.
4
Remove the toner cartridge from the bag. Grasp the cartridge
on both sides and shake it horizontally four or five times. After
shaking the cartridge, remove the toner seal.
on both sides and shake it horizontally four or five times. After
shaking the cartridge, remove the toner seal.
5
Gently insert the toner cartridge
along the guides until it locks in
place while pushing the lock release
lever. Remove the tape from the
shutter. Pull the shutter out of the
toner cartridge as shown in the
illustration. Discard the shutter.
along the guides until it locks in
place while pushing the lock release
lever. Remove the tape from the
shutter. Pull the shutter out of the
toner cartridge as shown in the
illustration. Discard the shutter.
• After removing the toner cartridge, do not shake it or tap on it. Doing
so may cause toner to leak from the cartridge. Put the old cartridge
immediately in the bag contained in the box of the new cartridge.
immediately in the bag contained in the box of the new cartridge.
• Dispose of the old toner cartridge in accordance with local
regulations.
Grasp the toner cartridge as shown in the illustration. Do not hold the
cartridge by the shutter. Be sure to only shake the cartridge before the
toner seal is removed.
cartridge by the shutter. Be sure to only shake the cartridge before the
toner seal is removed.
Toner cartridge lock release lever
Note
4 or 5 times
Shutter
Toner seal
Note
!AR-M201.book 75 ページ ２００８年２月１２日 火曜日 午後７時４１分