Sharp AL2041 用户手册
4
26
About interrupt copying
If you press the start (
) key to begin a copy job while a print job using the paper
tray or multi-bypass tray is in progress, the copy job will begin automatically after the
print data in the unit's memory is printed (interrupt copying). When this is done, the
print data remaining in the computer is not sent to the unit. When the copy job ends,
press the clear key twice to change the unit to the online state, or wait until the set
auto clear time (p.66) elapses. The remaining print data will be sent to the unit and
printing will resume.
* Interrupt copying during two-sided printing is not possible until the print job is finished.
print data in the unit's memory is printed (interrupt copying). When this is done, the
print data remaining in the computer is not sent to the unit. When the copy job ends,
press the clear key twice to change the unit to the online state, or wait until the set
auto clear time (p.66) elapses. The remaining print data will be sent to the unit and
printing will resume.
* Interrupt copying during two-sided printing is not possible until the print job is finished.
(AL-2041 only)
ORIGINAL PLACEMENT
Using the document glass
1
Open the original cover/SPF, and place the original.
2
Place an original face down on the document glass. Align it
with the original scale and the centring (
with the original scale and the centring (
) mark. Gently close
the original cover/SPF.
After placing the original, be sure to close the original cover/SPF. If left open,
parts outside of the original will be copied black, causing excessive use of
toner. In addition, toner may scatter inside the machine or the drum cartridge
may suffer damage.
parts outside of the original will be copied black, causing excessive use of
toner. In addition, toner may scatter inside the machine or the drum cartridge
may suffer damage.
• If you start a print job while a copy job is in progress, the print job will
begin when the copy job is completed.
• The scanning function cannot be used while a copy job is in progress.
• The document glass can read up to A4 original.
• Image loss 4 mm can occur at the leading and trailing edges of the
• Image loss 4 mm can occur at the leading and trailing edges of the
copies. Also image loss 4.5 mm in total can occur along the other
edges of the copies.
edges of the copies.
• When copying a book or an original which has been folded or a crumpled
original, press down the original cover/SPF lightly. If the original cover/
SPF is not securely closed, the copies may be striped or blurred.
SPF is not securely closed, the copies may be striped or blurred.
• When using the document glass to scan an original, make sure that an
original is not placed in the SPF.
mark
Original scale