Panasonic KXMB2030 用户手册
2.4 Selecting the operation mode
(Scan/Copy) (Fax: KX-MB2030
only)
(Scan/Copy) (Fax: KX-MB2030
only)
You can select the desired mode by pressing one of the
following buttons.
following buttons.
KX-MB2000
KX-MB2010
KX-MB2030
– MScanN: Select this mode when using the unit as a
– MCopyN: Select this mode when using the unit as a
– MFaxN (KX-MB2030 only): Select this mode when
Note:
R The default operation mode is the copy mode.
R You can change the default operation mode (feature
R The default operation mode is the copy mode.
R You can change the default operation mode (feature
#463 on page 58) and the timer before returning to
the default operation mode (feature #464 on
page 58) (KX-MB2030 only).
the default operation mode (feature #464 on
page 58) (KX-MB2030 only).
2.5 Setting the original
2.5.1 Using the scanner glass
A
B
1
Open the document cover (A).
2
Place the document FACE DOWN on the scanner
glass (B), aligning the top left of the document with
the corner where the mark is positioned.
glass (B), aligning the top left of the document with
the corner where the mark is positioned.
3
Close the document cover.
Note:
R Confirm that there are no documents in the automatic
R Confirm that there are no documents in the automatic
document feeder (KX-MB2010/KX-MB2030 only).
R Place the original onto the scanner glass gently. To
avoid malfunction, do not press down too firmly.
R If the original is a thick book, do not close the
document cover.
R Confirm that any ink, paste or correction fluid has
dried completely.
R Effective scanning area is shown by the shaded area:
Effective scanning area
208 mm
(8
3
/
16
"
)
289 mm
(11
3
/
8
"
)
4 mm
(
5
/
32
"
)
4 mm
(
5
/
32
"
)
4 mm
(
5
/
32
"
)
4 mm
(
5
/
32
"
)
For assistance, please visit http://www.panasonic.com/help
19
2. Preparation