Panasonic KXMB2030 用户手册
2.10 Your fax number
(KX-MB2030 only)
(KX-MB2030 only)
You can program your fax number so that it appears on
the top of each page sent.
the top of each page sent.
MFNMEN
MSetN
MFlashN
MStopN
MMenuN
1
MMenuN A MBNM1NM0NM3N A MSetN
2
Enter your fax number, up to 20 digits.
R To enter a “+”, press MGN.
R To enter a space, press MBN.
R To enter a hyphen, press MFlashN.
R To erase a number, press MStopN.
R To enter a “+”, press MGN.
R To enter a space, press MBN.
R To enter a hyphen, press MFlashN.
R To erase a number, press MStopN.
3
MSetN
4
Press MMenuN to exit.
To correct a mistake
Press MFN or MEN to move the cursor to the incorrect
number, and make the correction.
R To erase all numbers, press and hold MStopN.
Press MFN or MEN to move the cursor to the incorrect
number, and make the correction.
R To erase all numbers, press and hold MStopN.
2.11 Configuring the unit to
access the LAN
access the LAN
You can print documents, scan documents, receive
faxes or send faxes (KX-MB2030 only) using a computer
connected to the LAN. To enable these features, you
need to set the IP address, subnet mask, and default
gateway in the unit.
faxes or send faxes (KX-MB2030 only) using a computer
connected to the LAN. To enable these features, you
need to set the IP address, subnet mask, and default
gateway in the unit.
Important:
R Consult your network administrator when setting
R Consult your network administrator when setting
the IP address, subnet mask, and default
gateway.
gateway.
2.11.1 Setting up automatically with a DHCP
server
server
Your situation:
– When only one unit is connected to the LAN.
If your network administrator manages the network with
a DHCP (Dynamic Host Configuration Protocol) server,
it will automatically assign an IP (Internet Protocol)
address, subnet mask, and default gateway to the unit.
– When only one unit is connected to the LAN.
If your network administrator manages the network with
a DHCP (Dynamic Host Configuration Protocol) server,
it will automatically assign an IP (Internet Protocol)
address, subnet mask, and default gateway to the unit.
1
After connecting the LAN cable to the unit and the
computer, turn the power switch ON.
R The IP address, subnet mask, and default
computer, turn the power switch ON.
R The IP address, subnet mask, and default
gateway will be set automatically.
2
Install Multi-Function Station on the computer that
you want to use it with. See page 24 for details.
you want to use it with. See page 24 for details.
Note:
R You can connect two or more units and assign IP
R You can connect two or more units and assign IP
addresses automatically with a DHCP server, but we
recommend assigning static IP addresses manually
for each unit to avoid network access and
configuration troubles.
recommend assigning static IP addresses manually
for each unit to avoid network access and
configuration troubles.
2.11.2 Setting up manually
Your situation:
– When your network administrator does not manage
– When your network administrator does not manage
the network with a DHCP server.
– When two or more units are connected to the LAN.
You need to assign an IP address, subnet mask, and
default gateway manually.
You need to assign an IP address, subnet mask, and
default gateway manually.
1
MMenuN
2
Press MBNM5NM0NM0N to display “DHCP”.
3
Press M0N to select “DISABLED”. A MSetN
4
Set each item.
For the IP address:
1. Press M5NM0NM1N to display “IP ADDRESS”. A
For the IP address:
1. Press M5NM0NM1N to display “IP ADDRESS”. A
MSetN
2. Enter the IP address of the unit. A MSetN
For the subnet mask:
1. Press M5NM0NM2N to display “SUBNET MASK”.
1. Press M5NM0NM2N to display “SUBNET MASK”.
A MSetN
For assistance, please visit http://www.panasonic.com/help
23
2. Preparation