Samsung CLX-318X 用户手册

Troubleshooting_ 2

paper in the tray" on page 4).

•

Do not overload the tray. Ensure that the paper level is below the paper 

capacity mark on the inside of the tray.

•

Do not remove paper from the tray while your machine is printing.

•

Flex, fan, and straighten paper before loading. 

•

Do not use creased, damp, or highly curled paper.

•

Do not mix paper types in a tray.

•

Use only recommended print media (See "Setting the paper size and 

type" on page 6).

•

Ensure that the recommended side of the print media is facing up in the 

tray.

When an original document jams in the document feeder, a warning 

message appears on the display.

To avoid tearing the document, remove the jammed document slowly 

and carefully.

To prevent document jams, use the scanner glass for thick, thin or 

mixed paper-type originals.

1. Remove any remaining pages from the document feeder.
2. Open the document feeder cover.

3. Gently remove the jammed paper from the document feeder.

If you see no paper in this area, go to step 5.

4. Close the document feeder cover. Reload the pages you removed, if 

any, in the document feeder.

5. Open the scanner lid.
6. Seize the misfeed paper, and remove the paper from the feed area by 

carefully pulling it to the right using both hands.

7. Close the scanner lid. Load the removed pages back into the document 

feeder.

When a paper jam occurs, the warning message appears on the display 

screen. Refer to the table below to locate and clear the paper jam.

In the paper feed area 

and inside the machine

Inside the machine

See "In the fuser unit 

Inside the machine and in 

the paper exit area