Sharp FO-DC500 用户手册
![Sharp](https://files.manualsbrain.com/attachments/09c3752719497cddb7682a2870f2b01d664ac839/common/fit/150/50/128db0ff9ffd18d046ef9a246eb7bdc77b15206699c58d5f48a715e1dba1/brand_logo.png)
Dual-line Option (FO-DC600 only)
69
2.
Send/Receiv
e
Documents
♦
If you wish to restrict either of the lines to transmission only or reception
only, see the following section.
only, see the following section.
♦
When you program an auto-dial number (Rapid Key or Speed Dial number),
you can specify that the number use a particular line.
you can specify that the number use a particular line.
Note: The
key cannot be used to select a line if either of the lines has
been set to reception only as explained in the following section. A line
selection made with
will override a line selection programmed into a
Rapid Key or Speed Dial number.
LINE
@
LINE
@
1
Press
and then
so that
LINE SETTING MODE is selected in the
display.
display.
2
Press .
•
Line 1 is intially selected. If you wish to
adjust the setting for Line 2, press
to select LINE 2.
MENU
START/
ENTER
ENTER
Display:
MENU MODE
1:LINE SETTING MODE
2:LISTING MODE
3:ENTRY MODE
2:LISTING MODE
3:ENTRY MODE
LINE SETTING MODE
1:LINE 1
2:LINE 2
2:LINE 2
Restricting a line to transmission or reception /
selecting the reception mode for Line 1
selecting the reception mode for Line 1
You can restrict either line to transmission only or reception only. You can also
use this procedure to select the reception mode (AUTO or MANUAL) for Line
1 (the reception mode for Line 2 is fixed at AUTO).
use this procedure to select the reception mode (AUTO or MANUAL) for Line
1 (the reception mode for Line 2 is fixed at AUTO).