Xerox FS 5250 用户手册

Note:  

The option 2, COR, is printed in Landscape orientation with
reduced  vertical and horizontal spacing. Vertical spacing is 70 %
of normal, thus reducing as follows:

10 pitch fonts will be converted to 13 pitch
12 pitch fonts will be converted to 15 pitch
15 pitch fonts will be converted to 20 pitch
17 pitch fonts will be converted to 27 pitch

The page format command has two parameters. You send the command as
follows:

The command &&??% selects the character "%" as the escape character.
The escape character is a signal to the interface that the data stream
following is a command stream. The n1 is described at the previous page.
The last command in the above line (&&?? <space>) erases the escape
character again.

You do not have to enter an n2 value. If no parameter is entered for n2, the
n1 value will be used for all trays. If you wish the n1 value to be used for a
specific tray only, you must enter one of the following values:

1

Tractor

2

Tray 1

3

Tray 2

4

Manual feed

5

Envelope feed

6

Tray 3

7

Tray 4

When you have changed the paper tray, you can tell the interface to
remember the command. You do this by adding the %X1 to the command
illustrated above.