Xerox FS 5250 用户手册

Selected FSL Functions
Xerox FS 5250, User’s Guide

- 66 -

11.7. Duplex Printing

Function Y19: Duplex Printing

NOTE:
In XES, function Y62 must be programmed for this function to become
effective.

Duplex printing means that the printer can print on both sides of a piece of
paper.

NOTE:
You can only use this facility, if you have a duplex printer. If you are not
sure about this, look in the manuals for your printer.

11.7.1 System or interface?

There are different ways to go about selecting duplex printing, so you should
check whether you can select and deselect duplex printing in the software
you use on the system.

If this is possible, you should use the software option instead of the
description below. If you cannot select duplex printing on the system, you
can use the duplex function of the interface.

11.7.2 What to consider

If you share a printer with other users, you must always remember to reset
the interface to non-duplex at the end of the document. If not, other users'
documents will also be printed in duplex.

If the document you have printed has an uneven number of pages, the last
page will pend in the system printer buffer. If you wish to make sure that all
pages have been printed, you can set the duplex function to non-duplex
printing (setting 0) as described below: