Xerox X2 用户手册

• 

PRINTER INTERRUPT - Controls how long the Printer remains 
in the interrupted state with no interruption at the Scanner 
Control Panel.  This timer pertains to print jobs that have been 
interrupted to allow a copy job to process.  The allowed range is 
1 to 99 minutes.  The factory default is 1 minute. 

• 

FILE DELETION - Specifies the maximum amount of time a 
scanned image file remains on the file system before being 
deleted.  This timer pertains only to files scanned when the 
WIDE FORMAT COPY SYSTEM is in the READY TO SCAN 
mode. This timer can be set between 1 and 24 hours in 
increments of 1 hour.  When a file is scanned in, it is given a time 
stamp.  When the age of the file on the hard disk exceeds the 
value of the FILE DELETION timer, the file is automatically 
deleted to allow space for new files.  The default value is 24 
hours. After the files have been deleted, the directory will also be 
deleted if no other files are scanned to it. 

To adjust a timer: 

1.  Press the Menu key.  The MAIN MENU screen is displayed. 

2.  Press the Enter key to select CONFIGURATION.  The 

CONFIGURATION menu screen is displayed. 

3.  Press the Next key until TIMERS is highlighted. 

4.  Press the Enter key to select TIMERS.  The TIMERS screen is 

displayed. 

TIMERS

 

FEATURE (0 — 99) MIN

 60

 PRINTER INTERRUPT (1 — 99 MIN): 1

 FILE DELETION (1-24 HR): 24

 

5.  Press the Previous or Next key to highlight the desired timer. 

6.  Press the Enter key to select the highlighted timer. 

7.  Use the numeric keypad to enter the timer value. 

8.  Press the Enter key to confirm the value. 

9.  Repeat steps 5 through 8 if you want to set the value for 

additional timers. 

10.  Press the Exit key to return to the CONFIGURATION menu 

screen. 

 

The POWER SAVER option of the CONFIGURATION menu allows you 
to set the number of hours of inactivity after which the system goes into 
Power Saver mode.