Xerox X2 用户手册
138
•Cleaning and maintenance - Scanner
XEROX WIDE FORMAT COPY SYSTEM
A: Platen Glass
D: Document Drive Rolls (front)
B: Backer Roll
E: Document Feed Tray
C: Document Drive Rolls (rear)
Cleaning the Platen Glass and
Document Drive Rolls
Document Drive Rolls
Perform the following steps daily:
1. Open the Top Cover.
2. Dampen a clean, lint-free towel (600S4372) with platen glass
cleaning fluid (Xerox 43P81).
3. Wipe the Platen Glass with the towel.
4. Visually inspect the Platen Glass to ensure that all dirt, glue, and
other residue have been removed.
5. Place a small amount of the cleaning fluid on the towel and clean
the front and rear Document Drive Rolls. Rotate the Rolls as you
clean them to ensure that the entire roll surface is clean.
clean them to ensure that the entire roll surface is clean.
6. Place a small amount of the cleaning fluid on the towel and wipe
the white Backer Roll.
NOTE: The Backer Roll is located on the underside of the Top Cover.
The Backer Roll may rotate as you clean it. This is normal behavior.
The Backer Roll may rotate as you clean it. This is normal behavior.
7. Close the Top Cover.