Xerox X2 用户手册

The Next key highlights the following item in a displayed list. 

The  Enter key either confirms the selection of the currently highlighted 
item or confirms an entered numeric value. 

The  Exit key cancels a selection operation and returns you to a previous 
screen.  It has other effects, depending upon the specific situation, that 
are explained later. 

The Mode key is a valid selection only when READY is displayed on the 
screen.  This key is used to switch between the READY TO COPY mode 
and the READY TO SCAN mode. The SCAN mode can be entered only 
if the Scan to Net feature key is loaded. 

Below are examples of the READY screen in COPY and SCAN modes. 

READY TO COPY
INSERT DOCUMENT

100.0%

AUTO

1

READY TO SCAN
INSERT DOCUMENT

   400 DPI

TIFF/CCITTG4
BIT

 

In the COPY mode, the scanned image, or set of images is printed on 
the Printer and then deleted from the hard disk.   

In the SCAN mode, the scanned image, or set of images, is stored on 
the hard disk for later retrieval over a network by a client running on a 
remotely located device.  Refer to the "Scanning to the Network" section 
for more information about the SCAN mode.