Xerox X2 用户手册

When the Graphical Display indicates READY TO COPY, the WIDE 
FORMAT COPY SYSTEM is ready to make copies.   

Several settings are available for controlling how the Scanner starts and 
finishes a scan.  These settings are accessible from the SCANNER 
CONTROL option of the CONFIGURATION menu. 

SCANNER CONTROL

DOCUMENT RETURN:

 AUTOSCAN

MODE:

4

      

     

 

When making a copy, you need to be aware of these settings.  If any of 
these settings have been changed from the default settings, the Scanner 
may not operate according to your expectations. 

Below is a brief summary of the scan control settings. For complete 
information about these settings, refer to "Scanner Control" in the "Main 
Menu" section of this manual. 

AUTOSCAN 

AUTOSCAN enabled is the default setting.  Normally, the AUTOSCAN 
mode is enabled.  When it is enabled, the Scanner automatically begins 
the scanning of a document when the document is inserted.  If 
AUTOSCAN is disabled, the Scanner transports the document to the 
starting position and then waits for you to press the Start key before 
beginning the scan. 

DOCUMENT RETURN 

FRONT is the default setting.  When the DOCUMENT RETURN feature 
is set to FRONT, the Scanner returns the document to the front or