Xerox X2 用户手册

TRANSFORM

MIRROR:

OFF

INVERT:

OFF

 

4.  Press the Next key to highlight INVERT. 

5.  Press the Enter key to select INVERT. 

6.  Press the Previous or Next key to turn the option ON or OFF. 

7.  Press the Enter key to confirm your choice. The graphical 

display updates accordingly. 

When INVERT is ON, the icon on the right side of the TRANSFORM 
screen is inverted.  The example below shows the TRANSFORM screen 
with INVERT turned ON. 

TRANSFORM

MIRROR

OFF

INVERT

ON

 

8.  Press the Exit key to return to the READY screen. 

The Sample key allows you to print a sample of a scanned image in both 
the COPY mode and the SCAN mode.  You can then check the sample 
for quality or observe the results of features or copy quality adjustments 
before document is copied or scan to a file.   

The dimensions of the sample, in the Copy mode, are the width of the 
page by 210 mm.  The sample is taken from a point equidistant from the 
lead and trail edge of the image. Refer to Copy Mode below for 
instruction to print a sample. 

In the SCAN mode the sample size is the whole document. To enable 
the Sample key in the SCAN Mode, the Scan-to-net feature must be 
installed. To enable a print sample the Scan-to-print feature key must be 
installed. Refer to Scan Mode Sample below for instruction

s

 to print a 

sample. 
 

To print a sample of a scanned image: 

1.  Press the Sample  key.  The Sample indicator lamp illuminates.  

The Scanner Control Panel is placed in Printer Interrupt mode