Xerox 4590 用户手册
Xerox 4110/4590 Getting Started
2-5
2. Product Overview
NOTE 1: Throughout this guide, Finisher D and Booklet Finisher D
may be referred to simply as the Finisher.
NOTE 2: Throughout this guide, the Duplex Automatic Document
Feeder is abbreviated as "Document Feeder.”
may be referred to simply as the Finisher.
NOTE 2: Throughout this guide, the Duplex Automatic Document
Feeder is abbreviated as "Document Feeder.”
Power on/off
Switch on the power before operating the machine. The machine
warms up in approximately five minutes after which you can make
copies. Switch off the machine at the end of the day or when it is
not in use for a long period of time. Use the Power Saver feature
to reduce the power consumption of the machine.
For information about power saving feature, refer to “Power Saver
mode” on page 2-7.
warms up in approximately five minutes after which you can make
copies. Switch off the machine at the end of the day or when it is
not in use for a long period of time. Use the Power Saver feature
to reduce the power consumption of the machine.
For information about power saving feature, refer to “Power Saver
mode” on page 2-7.
Power on
Perform the following to power on the machine:
1. Open the cover.
1. Open the cover.
2. Press the power switch to the on position [
|
].
NOTE: The "Please wait..." message on the UI indicates that the
machine is warming up. The machine cannot be used while it is
warming up.
machine is warming up. The machine cannot be used while it is
warming up.
36
Punch scrap container
Collects the scraps from the puncher. Open to remove the scraps.
37
Tri-Fold output tray
Receives copies when you select Tri-Fold In or Tri-Fold out.
38
Tri-Fold output tray button
Press this button to open tri-Fold output tray.
39
Left cover.
Open this cover to access the machine and to clear paper jams.
40
Staple cartridge storage
space
space
Staple cartridge for replacement can be stored.
No.
Component
Function