Xerox 7232 用户手册

The following are required for the machine.

•

Scan To E-mail Kit is required to send scanned documents as E-mail attachments.

•

The machine is connected to the network using TCP/IP.

•

The environment allows the sending and receiving of E-mail.

NOTE: A file may not print if the format differs from those in the above table.

NOTE: It is recommended to use Microsoft Outlook Express 5.5/6.0 or Netscape 7 as 
E-mail software.

This section describes how to enable the E-mail feature.

To use the E-mail feature, configure the following settings on the machine.

Connect the machine to the network.

Press the <Log In/Out> button on the control panel, and then type the Key 
Operator login ID to enter the Key Operator mode. 

NOTE: The passcode may also be required depending on the machine configuration.

Press the <Machine Status> button on the control panel, and then select the 
[Tools] tab on the screen. 

ITU-T Recommendations

ITU-T T.37, T.30, F.185 and E.164

E-mail forwarding

RFC2304, RFC2305

DSN function

RFC1891, 1894

MDN function

RFC2298

SMTP receiving

RFC821, 822, 1869

POP3 receiving

RFC1939

MIME version

Version1.0 (RFC2049)