Xerox 7232 用户手册

Repeat steps 8 and 9 for the Secondary Server settings.

Select [Domain Name] and enter the domain name. This is the fully qualified 
domain which Kerberos server supports.

Connect the machine to the network.

In the Key Operator mode, press the <Machine Status> button on the control 
panel, and then select the [Tools] tab on the screen. 

Select [Authentication/Security Settings], then [Authentication].

Set the authentication method to enable Kerberos. Select [Login type], then 
[Remote Access] followed by [Save].

Files can be scanned on the multifunction machine and routed on to a server or a client 
using FTP protocol. Directory structures (repositories) need to be created on the server 
to hold the scanned documents.

See the Quick Network Setup Guide for information about how to set up templates, 
repositories, transfer prococols, and enabling ports.

Confirm that an existing operational network utilizing TCP/IP is available.

FTP Server/Client exists and is running.

Repository (folder) needs to be created on the FTP server to hold the scanned 
document.

Confirm that the following ports are enabled:

1) TCP/IP

2) FTP Client

Repositories need to be set up on 
the FTP server.

Required

This is the location or path of the directory 
for saving scanned documents.

Server IP Address

Required

This is the IP address of the FTP server.

FTP Login/password information

Optional

This is required if the FTP server requires 
login/password authentication. Most FTP 
servers require a login/password.

Kerberos IP Address

Optional

If Remote Authentication is required, then 
Kerberos needs to be enabled.