Xerox 7232 用户手册

An Internet Fax job should be submitted to make sure that the machine has been 
installed and configured correctly.

NOTE: Some of the configuration options for this protocol are only available from 
CentreWare Internet Services. 

NOTE: Keep the SNMP port enabled while you use the machine on the TCP/IP 
network.

Initially, activate the port.

Connect the machine to the network.

Press the <Log In/Out> button on the control panel, and then type the Key 
Operator login ID to enter the Key Operator mode. 

NOTE: The passcode may also be required depending on the machine configuration.

Press the <Machine Status> button on the control panel, and then select the 
[Tools] tab on the screen. 

Select [System Settings].

Select [Connectivity & Network Setup].

Select [Port Settings]. 

Select [Receive E-mail] and then [Change Settings].

Select [Port Status] and then [Change Settings].

Select [Enabled] and then [Save].

On the [Port Settings] screen, select [Send E-mail] and then [Change Settings].

Select [Port Status] and then [Change Settings].

Select [Enabled] and then [Save].

Next, establish TCP/IP.

In [Connectivity & Network Setup], select [Protocol Settings].

Under [TCP/IP - Operation Mode], select [IPv4 Mode], [IPv6 Mode], or [Dual 
Stack].

Select [IP Address Resolution], and then [Change Settings].

Select a method for establishing an IP address from [DHCP], [BOOTP], [RARP], 
[DHCP/Autonet], and [STATIC], and then select [Save].

NOTE: Use the DHCP server together with the Windows Internet Name Server 
(WINS) server.