Xerox 7232 用户手册

This chapter explains how to set up the Server Fax feature of the machine. The 
following information is provided.

Server Fax Overview – page 157
Information Checklist – page 157
Server Fax Environments – page 158
Server Fax Installation – page 158
Installation Procedure – page 158
Network Communication Setup – page 158
Test Server Fax transmission – page 162

If your machine is installed with both the optional scanner kit and the optional server 
fax kit, you can use the Server Fax feature that sends and receives image data through 
a Server Fax server.

NOTE: The Server Fax feature cannot be used concurrently with the Fax feature or 
the Internet Fax feature. While the Fax Server feature is enabled, the Fax feature is 
detected as "not installed" even if the fax feature is supported on the machine. During 
that time, therefore, fax transmission and reception are disabled and printed reports 
show that the machine does not support the Fax feature.

Before enabling this feature, make sure that the following items are available or have 
been performed.

An existing operational network utilizing TCP/IP is required. These 
procedures are not designed to install a network.

Customer

Obtain and record the following information:
• IP address
• Gateway address
• Subnet mask (for IPv4) / Prefix (for IPv6)
• Host name
Refer to the Glossary for additional information about the Gateway Address 
and Subnet mask.

Customer

Test the machine to make sure that it is installed fully and functioning 
correctly.

Customer