Xerox 7232 用户手册
Configuring Xerox Secure Access (Authentication)
Xerox WorkCentre 7232/7242 System Administration Guide
175
Configure Remote Authentication for Kerberos (Solaris)
At Your Workstation:
1.
With the Authentication Configuration web page still running, click Configure next
to the server you wish to use for Authentication. If not still running, perform steps 2
and 3 below.
to the server you wish to use for Authentication. If not still running, perform steps 2
and 3 below.
2.
If the web page is not still running, open your Web browser and enter the TCP/IP
address of the machine in the Address or Location field. Press Enter.
address of the machine in the Address or Location field. Press Enter.
3.
Click the Properties tab. Note that (as of February 2007) you can either return to
the Security folder and the Authentication Configuration hot link (discussed on the
previous page), or use the alternative path, stated below.
the Security folder and the Authentication Configuration hot link (discussed on the
previous page), or use the alternative path, stated below.
4.
Select the Remote Authentication Server / Directory Service folder in the list of hot
links, select Authentication System and pick Kerberos (Solaris) from the drop-
down list. Click Apply.
links, select Authentication System and pick Kerberos (Solaris) from the drop-
down list. Click Apply.
5.
Select Kerberos Server Settings.
6.
Enter the IP Address of the Primary Server (the server running the Key
Distribution Center service).
Distribution Center service).
7.
Enter the IP Address of the Secondary Server, if necessary.
8.
Enter details for the Realm. For example (in upper case): EXAMPLE.COM.
9.
Enter details for up to 4 alternate servers and backups, if required.
10.
Click Apply, and supply the Administrator User name and password if prompted.