Xerox 7232 用户手册

This section explains the troubleshooting procedures and restrictions while using 
EtherTalk.

This section explains what to do when a problem occurs while using EtherTalk. The 
possible causes, confirmation methods, and actions are as follows.

A job was printed on a 
different machine than the 
assigned machine.

If there are multiple machines 
on the network with the same 
name, the machine names 
are changed automatically 
depending on the power-on 
timing of each machine. Print 
jobs intended to be printed on 
one machine are sent to 
another machine.

Change the machine names 
so that all machine names on 
the network are unique.

The machine cannot be 
accessed from a client.

The machine name, used by 
the client to recognize the 
machine, cannot be 
registered if the machine is 
turned on when not 
connected to the network.

Turn the machine on after 
connecting to the network. If 
the machine is turned on 
when not connected to the 
network, turn the machine off, 
connect to the network, and 
turn the machine on again.