Xerox 7232 用户手册

Record the IP address allocated.

From a workstation, open a web browser (such as Internet Explorer), and then 
enter the machine’s IP address. If connected properly, you should see a 
CentreWare Internet Services web page for your machine.

NOTE: CentreWare Internet Services is a powerful tool for configuring the machine 
remotely. The default user name is "11111" and the passcode is "x-admin". The user 
name and passcode are case sensitive and should be changed after install.

Load the print drivers on the workstations that will be accessing the machine.

NOTE: On startup, the WorkCentre multifunction machine defaults to DHCP to obtain 
its network configurations, so DHCP must be turned off by manually entering a static 
IP address.

Before installing, record the following information for use during setup:

NOTE: To obtain this information, contact your System Administrator.

Power on the machine.

Press the <Log In/Out> button on the control panel, and then type the Key 
Operator login ID to enter the Key Operator mode. 

NOTE: The passcode may also be required depending on the machine configuration.

Press the <Machine Status> button on the control panel, and then select the 
[Tools] tab on the screen. 

Select [System Settings].

Select [Connectivity & Network Setup].

Select [Protocol Settings].

Under [TCP/IP - IP Mode], select [IPv4 Mode], [IPv6 Mode], or [Dual Stack].