Xerox 7232 用户手册

This page allows you to configure the Bonjour settings.

NOTE: Some settings on this page will only be available after you restart CentreWare 
Internet Services, or after the machine is switched off and on.

At the CentreWare Internet Services home page for the machine, select the 
[Properties] tab.

In the [Properties] frame, select the plus symbol [+] to the left of the [Connectivity] 
folder.

Select the plus symbol [+] to the left of the [Protocols] folder.

Select [Bonjour].

Set up the following displayed in the frame.

•

Host Name – Enter the host name.

•

Printer Name – Enter the printer name.

Select [Apply] to reflect the new settings.

Enter the user ID and passcode, and then select [OK].

NOTE: The default user ID is "11111" and the default passcode is "x-admin".

When the reboot message appears, select [Reboot Machine].

This page allows you to configure the WSD settings.

NOTE: Some settings on this page will only be available after you restart CentreWare 
Internet Services, or after the machine is switched off and on.

At the CentreWare Internet Services home page for the machine, select the 
[Properties] tab.

In the [Properties] frame, select the plus symbol [+] to the left of the [Connectivity] 
folder.

Select the plus symbol [+] to the left of the [Protocols] folder.

Select [WSD].

Set up the following displayed in the frame.

•

Port Number - Enter the port number between 1 and 65535. Do not use the 
numbers assigned to the other ports. 

•

TBCP Filter - Check to enable TBCP Filter when PostScript data is to be 
processed. This is only available when the optional PostScript Kit is installed. 
When the transmission data includes binary data or EPS data, disable this. For 
Windows, follow the Output Protocol setting in the Device Settings tab of the 
Properties screen of the print driver.