Xerox 7232 用户手册

This section describes the installation procedures to use the machine in a NetWare 
environment.

The installation procedure is as follows.

Enable the SMB protocol.

Go to Properties->Connectivity->Port Settings.

At the CentreWare Internet Services home page for the machine, select the 
[Properties] tab.

In the [Properties] frame, select the plus symbol [+] to the left of the [Connectivity] 
folder.

Select the plus symbol [+] to the left of the [Port Settings] folder.

On the SMB line, select the Enabled box. Select [Apply].

When using IPX:

Set the Netware protocol to [Enabled] using the touch screen or CentreWare 
Internet Services.

When using TCP/IP:

Set the Netware protocol to [Enabled] using the touch screen or CentreWare 
Internet Services. Set the IP address on the control panel or CentreWare Internet 
Services.

For more information, refer to Network Communication Setup on page 79.

For more information, refer to NetWare Setup on page 81.

For more information, refer to Workstation Setup on page 81.

For more information, refer to Test Print on page 81.

Use this procedure to set up the network communication parameters of the machine.