Xerox D60327 用户手册
Installation
Xerox 4500 PS TR
Xerox 4500 PS TR
16
2. Installation of Xerox 4500 PS TR
When unpacking the unit, record the universal MAC address on the
label attached to the rear panel of the unit.
label attached to the rear panel of the unit.
Installation, configuration and changes to the mainframe and LAN of
the Xerox 4500 PS TR must only be carried out by a person with
authority and knowledge of the relevant environment.
the Xerox 4500 PS TR must only be carried out by a person with
authority and knowledge of the relevant environment.
CAUTION
The interface can be damaged by static discharge. To prevent this
damage, the interface comes wrapped in an antistatic bag.
damage, the interface comes wrapped in an antistatic bag.
When you remove the interface from the bag and when you install it, hold
the interface by the edges only. Do not touch the components or
connections.
the interface by the edges only. Do not touch the components or
connections.
Do not throw away the antistatic bag. If the interface is removed from the
printer later, it should be kept in the antistatic bag.
printer later, it should be kept in the antistatic bag.
2.1 Pre-Installation tasks
Prior to installing the Xerox 4500 PS TR, you are to set
- ring speed according to your system requirements and
- check that language setting is correct.
- ring speed according to your system requirements and
- check that language setting is correct.
Remaining switches are to be operated by support staff only.
These settings are performed on the Dip switch bank. The DIP switch
bank sits on the interface
bank sits on the interface
2.1.1 Ring speed configuration
Dip switch number 4 is used for setting ring speed. You can select
connection to the following token ring speeds:
4 Mbaud - Dip Switch must be set to OFF
16 Mbaud - Dip Switch must be set to ON
connection to the following token ring speeds:
4 Mbaud - Dip Switch must be set to OFF
16 Mbaud - Dip Switch must be set to ON
For details on network cabling connection, see the section on:
“Network Installation”.
“Network Installation”.
ON
ON
OFF
OFF
1 2 3 4
1 2 3 4