Xerox 7428 用户手册

Print Driver Installation

WorkCentre 7425/7428/7435

System Administrator Guide

15

NetBIOS over IP Client/Server Printing

Before You Start
1. Obtain the print driver for your computer's operating system. See 

2. Print a Configuration Report. See 

3. On the Configuration Report, verify that SMB is enabled. Also, verify that TCP/IP is enabled as one 

of the supported protocols. To enable SMB, see 

on page 52).

4. Set Up a Server to Queue Jobs to the Printer. If you have not already set up a Server, for a quick-

step set up procedure, for help see 

Verify that the Correct Protocols and Services are Installed in the Computer
1. Verify that the Internet protocol (TCP/IP) is installed in the Computer. On the Windows XP desktop, 

click Start, Control Panel, and double click Network Connections. Right click the Local Area 
Connection icon and select Properties.
On the Windows 2000 Desktop, right click the My Network Places icon and select Properties. Right 
click the Local Area Connection icon and select Properties.

2. Verify that the Internet Protocol (TCP/IP) has been loaded. If it has, click this item and click the 

Properties button to verify that this computer is using either a dynamic or static method to obtain 
a valid TCP/IP address.

3. Also verify that this computer is using a DNS (or WINS) Server for resolution of the NetBIOS Host 

name (typically the same name as the computer's Internet host name). If the TCP/IP protocol is 
not loaded, click the Install… button, then select Protocol as the type of network component that 
you wish to install. Click the Add… button and select Internet Protocol (TCP/IP). 

4. With your operating system installer disk readily available, click the Have Disk… button and follow 

any remaining instructions.

5. Verify that the Client for Microsoft Networks is installed in the computer. On the Windows XP 

desktop, click Start, Control Panel, and double click Network Connections. Right click the Local 
Area Connection icon and select Properties. 
On the Windows 2000 Desktop, right click the My Network Places icon and select Properties. Right 
click the Local Area Connection icon and select Properties. 

6. If the Client for Microsoft Networks is not loaded, click the Install… button, then select Client as 

the type of network component that you wish to install. 

7. Click the Add… button and select Client for Microsoft Networks. 
8. With your operating system installer disk readily available, click the Have Disk… button and follow 

any remaining instructions.

Add the Printer to the Windows Desktop
1. On the desktop, from Start, select Printers and Faxes.
2. Double-click Add Printer. From Printer Tasks, select 

Add a printer.

3. When the Add Printer Wizard displays, click Next.
4. Select Network Printer and click Next.