Xerox 765 用户手册
B-6
WorkCentre Pro 665/685/765/785
4.
Lift up on two green handles to separate the Drum Unit from the
Developer Assembly. The following figure shows the Drum Unit
and the Developer Assembly.
Developer Assembly. The following figure shows the Drum Unit
and the Developer Assembly.
5.
Place the Drum Unit on a level surface. Cover the Drum Unit with
a clean cloth to protect the unit from exposure to light.
a clean cloth to protect the unit from exposure to light.
6.
Place the Developer Assembly over paper to protect the surface
on which you are working.
on which you are working.
7.
Tap the toner cartridge several times to make any remaining
toner fall into the Developer Assembly.
toner fall into the Developer Assembly.
Note:
Avoid touching the toner to your clothing since toner
cannot be removed easily. If the toner sticks to your
clothing, immediately rinse out the toner with cold water.
cannot be removed easily. If the toner sticks to your
clothing, immediately rinse out the toner with cold water.
098
Developer
Assembly
Assembly
Drum Unit