Xerox 4500 PS TR 用户手册

WRKAFP2  DEVD (PRTPS123 )

RETRY (2)
TCPIP (*YES)
RMTSYS (‘192.0.110.21’)  
PORT (5001)
ACTTMR (170)
INACTTMR (*NOMAX)

This value must match the DEVD in the printer device
description.

Specifies the number of retry attempts to establish a sessi on

This value must be set to *YES.

An IP address or a host name may be used for this parameter. In
this example, an IP address is used. When configuring the IP
address parameter for the  Xerox 4500 PS TR IPC (IPDS), an IP
address (and not a host name) must be used.

This value must match the value used for the  Xerox 4500 PS TR
(IPDS) TCP port parameter. The Port no. 5001 is the default port
number of the first IPDS port on the  Xerox 4500 PS TR (IPDS).

ACTTMR This value specifies the n umber of seconds PSF/400 will wait

for the Xerox 4500 PS TR to respond to an activation request.
If the printer does not respond within this period, PSF/400 will
terminate.

INACTTMR This value specifies the length of time PSF/400 will maintain a

session with the printer while there are no spooled files with a
status of RDY.

NOTE: 

The values in the WRKAFP2 command vary slightly according
to the PTF level and the operating system version.
Consult the following document supplied on the diskette for
details:

If your environment has a need to make certain that a TCP/IP attached device
has not been powered off, you may use the TCP KEEP ALIVE parameter in
CHGTCPA. This value used for this parameter determines how long PSF/400
will wait for a response from a device before terminating.