Xerox 4500 PS TR 用户手册
Installation
Xerox 4500 PS TR
Xerox 4500 PS TR
17
2.1.2 EU - US language settings
Dip switch number 2 is used for language setting.
You can select between EU and US language settings.
Should you need to change language setting, set dip switch number 2
as follows:
as follows:
EU language setting - set the switch to OFF
US language setting - set the switch to ON
US language setting - set the switch to ON
2.1.3 National language selection - CPGID (IPC)
When you have selected either EU or US settings, you should also
check that you have the correct default codepage for your national
language.
check that you have the correct default codepage for your national
language.
Use the program MakeITDS - supplied with this kit - to change the
CPGID. In the following you will find guidelines for entering the CPGID
default value in the MakeITDS program.
CPGID. In the following you will find guidelines for entering the CPGID
default value in the MakeITDS program.
Make a settings printout (e.g. via the test key) containing IPDS settings
and the IPDS resident codepages. The IPDS settings will state the
default codepage (CPGID - Code Page Global ID). See the example of
the IPDS settings in the following.
and the IPDS resident codepages. The IPDS settings will state the
default codepage (CPGID - Code Page Global ID). See the example of
the IPDS settings in the following.
Example:
IPC - SETTINGS PRINTOUT
Firmware Version :Sxx xxx xxx
Basic Information
Installed Memory
: 2 Mbytes
Installed Interface
: Token Ring
IPDS Setup
IBM Emulation
: 4028
Default Codepage (CPGID)
: 01F4H (500)
Codepage Version
: 1
ON
ON
OFF
OFF
1 2 3 4
1 2 3 4