Xerox 4500 PS TR 用户手册

If the TCP/IP is enabled, the LAN LED will  - if BOOTP parameter set to
YES -  start to flash as the  Xerox 4500 PS TR tries to contact a BOOTP
server. If no BOOTP server is availab le, the Xerox 4500 PS TR will use
defaults. If valid  default values are found , the LAN LED will remain lit.

The printer and network installation is now complete.  For advanced
configuration, see the chapter “Configuration of Xerox 4500 PS TR”.

This section provides installation guidelines for IPDS or FSL upgrade modules.

1. Disconnect all cables to the  Xerox 4500 PS TR.

2. Loosen the thumbscrews and pull out the interface

3. Place the Xerox PS upgrade module (be it IPDS or FSL) on the 4

plastic spacers on the base module. Make sure that the pins on the
connector J(x) fits correctly.

4. Remount the interface into the printer and fasten the 2  thumbscrews

loosened in step 2.

5. Generate a settings printout to verify the installation of the upgrade 

module.

The printer and network installation is now complete.  For advanced
configuration, see the chapter “Configuration”.