Xerox 701P42722_EN 用户手册

•

DNS

•

Connection Time-Out

NOTE: For more information about the options, refer to Properties in the CentreWare 
Internet Services chapter of the User Guide.

Select [Apply New Settings] to reflect the new setting.

Enter the user ID and password, then select [OK].

NOTE: The default user ID is "admin" and the default password is "x-admin".

This page allows you to configure the Port9100 settings for the following options.

NOTE: Some settings on this page will only be available after you reboot the machine 
from CentreWare Internet Services, or after the machine is switched off and on.

At the CentreWare Internet Services home page for the machine, select the 
[Properties] tab.

In the [Properties] frame, select the plus symbol [+] to the left of the [Protocol 
Settings] folder.

Select [Port9100].

Set up the following options to be displayed in the frame.

•

Port Number

•

TBCP Filter (Only available when the optional PostScript Kit is installed.)

•

Connection Time-Out

NOTE: For more information about the options, refer to Properties in the CentreWare 
Internet Services chapter of the User Guide.

Select [Apply New Settings] to reflect the new setting.

Enter the user ID and password, then select [OK].

NOTE: The default user ID is "admin" and the default password is "x-admin".

This page allows you to configure the UPnP settings for the following options.

NOTE: Some settings on this page will only be available after you reboot the machine 
from CentreWare Internet Services, or after the machine is switched off and on.

At the CentreWare Internet Services home page for the machine, select the 
[Properties] tab.

In the [Properties] frame, select the plus symbol [+] to the left of the [Port Settings] 
folder.

Select [UPnP].