Xerox 575 用户手册
Transmitting Documents
5-4
WorkCentre Pro 555/575
Memory Send or Direct Send Default Mode
In the “Memory Send” mode, the machine first scans the document
into memory, then dials the number and sends the fax. The Memory
Send mode allows up to 100 jobs to be reserved and sent as the line
becomes available. Any operation initiated using one of the dialing
methods: One Touch, Speed Dial, Alpha, or Keypad Dialing is
automatically performed as a Memory Send transmission.
into memory, then dials the number and sends the fax. The Memory
Send mode allows up to 100 jobs to be reserved and sent as the line
becomes available. Any operation initiated using one of the dialing
methods: One Touch, Speed Dial, Alpha, or Keypad Dialing is
automatically performed as a Memory Send transmission.
The Direct Send mode can be selected as the default setting or
selected from the Control Panel for one operation. This mode can be
selected when residual memory is low or a very large document is to
be transmitted. In this mode the machine sends each page as it is
scanned.
selected from the Control Panel for one operation. This mode can be
selected when residual memory is low or a very large document is to
be transmitted. In this mode the machine sends each page as it is
scanned.
Set the Memory Send mode to OFF to enable the Direct Send
transmission mode.
transmission mode.
To change the default transmission mode:
1.
Press:
2.
Select the default transmission mode:
To set Memory Send as the default mode, press
.
To set Direct Send
as the default mode, press
.
3.
The menu selection screen redisplays. Press
Stop to return to
the Standby Mode.
Menu
2.Off
Memory send
1.On