Xerox 575 用户手册

下载
页码 327
Troubleshooting
WorkCentre Pro 555/575
 
12-3
Calling for Service
If you have an error with the machine and can not correct the error 
using the tables, contact the Customer Support Center. Have 
available the serial number of the machine and any messages 
displayed.
Contact the support center at the following telephone number:
USA
1-800-821-2797
Canada
1-800-939-3768
South America
Contact your local service 
provider.
Xerox Limited Markets
Refer to the Warranty Pack 
for support center and 
telephone numbers.
Error Messages and Codes
If an abnormal condition arises in the machine or an incorrect 
operation is performed, an alarm signal is generated for about 4 
seconds and a message to indicate the nature of the error is 
displayed. If this happens, take corrective action per the following 
table.
Error Message
Probable Cause
Corrective Action
BROKEN 
REGISTRATION 
PRESS [STOP] 
CONFIRM DIAL 
LIST
Phonebook numbers and 
machine settings have been 
deleted due to a power 
failure, etc.
Press the 
Stop
 key to restore 
the idle state. If the same 
error message is displayed 
again, reprogram the 
machine.
COMM ERROR - 
Retry
An error occurred during the 
communication. 
Retry the communication.
DOCUMENT IN 
MEMORY
A document was received to 
memory because printing 
could not occur.
Add paper to the paper tray or 
check for a paper jam. If a 
paper jam exists, see the 
“Paper Jam” section in User’s 
Guide.
DOCUMENT JAM
A document jam occurred.
Remove the jammed 
document. See the 
“Document Jam” section in 
User’s Guide.