Xerox 3535 用户手册
4 – 5 4
Xerox DocuColor 3535 Printer/Copier
Other Scan Settings
This section describes how to set other scanner-related settings.
The following items can be configured in Other Settings.
The following items can be configured in Other Settings.
Scan Service
Set whether or not to enable scan features. The default is
Enabled.
Enabled.
Memory Full Procedure
Set the processing method when the scanner runs out of memory
during scanning. Set whether or not to enable documents stored
so far.
during scanning. Set whether or not to enable documents stored
so far.
Enter the setting on the Numeric Keypad using the numbers listed
in the following table. The default is 1, Enabled.
in the following table. The default is 1, Enabled.
Maximum Stored Pages
Set the maximum number of stored pages for scanning. Set any
number between 1 ~ 999.
number between 1 ~ 999.
Enter the number of the pages using the Numeric Keypad. The
default is 999.
default is 999.
Lighter/Darker Level
Set the default for the density assigned to Lighter ~ Darker in
Lighter/Darker/Contrast on the Image Quality/File Format screen
in Scan mode. Set the density between -100 ~ +100 in increments
of 1.
Lighter/Darker/Contrast on the Image Quality/File Format screen
in Scan mode. Set the density between -100 ~ +100 in increments
of 1.
Lighter (+3) ~ Lighter (+1) must be set between -100 and -1, and
Darker (+1) ~ Darker (+3) must be set between +1 ~ +100.
Normal, 0, cannot be changed. Set so that the values increase
from Lighter (+3) to Darker (+3).
Darker (+1) ~ Darker (+3) must be set between +1 ~ +100.
Normal, 0, cannot be changed. Set so that the values increase
from Lighter (+3) to Darker (+3).
Select scanning density using the up and down arrow buttons on
the left, and set the value using the up and down arrow buttons on
the right.
the left, and set the value using the up and down arrow buttons on
the right.
Setting
Description
0
Disabled (Discard
stored documents)
stored documents)
1
Enables stored data