Xerox 32N00467 用户手册

The following chart lists some conditions that may occur and the recommended solutions. 
Follow the suggested solutions until the problem is corrected. If the problem persists, please 
call for service.

Check that the product is plugged into an electrical receptacle and 
ensure that there is power to the receptacle.

Ensure the ON/OFF switch is in the ON position.

If the original is light, use the Lighten/Darken key to darken the 
image.

If the original is dark, use the Lighten/Darken key to lighten the 
image.

If defects are on the original, press the Lighten/Darken key to 
adjust the image.

If no defects are on the original, clean the Document Glass and 
underside of the Document Feeder.

If a line is present when using the Document Feeder and not when 
using the Document Glass, clean the CVT glass. For stubborn 
spots use a crumpled up piece of paper or a credit card. Refer to 
“Cleaning the Document Glass and Constant Velocity Transport 
(CVT) Glass” on page 9-2.

If the problem still persists, clean the Drum Cartridge. Refer to 
“Maintenance Tools” on page 8-10 for instructions.

Ensure that original is positioned correctly on the Document 
Glass.

Check that copy paper is loaded correctly.

Ensure that the original is face down on the Document Glass or 
face up in the Document Feeder.

Replace the paper in the tray with paper from a new package.

In high humidity areas do not leave paper in the product for 
extended periods of time.