Xerox 412 用户手册

下载
页码 212
Xerox WorkCentre Pro 412 User Guide 
Page 8-13
Bas
ic Tr
o
ubl
e
s
ho
oti
n
g
LCD Error Messages
If an abnormal condition arises in the machine or an incorrect 
operation is performed, a message indicating the nature of the 
error is displayed. If this happens, take the corrective action 
listed in the following table.
Display
Meaning
Solution
Bypass Jam
The machine detects non feeding 
from the bypass tray.
Load paper in the bypass tray.
Document Jam
The loaded document has jammed 
in the ADF.
Clear the document jam. Refer to 
page 8-2.
Door Open
The side cover is not securely 
latched.
Close the side cover until it locks 
into place.
Drum Warning
The drum cartridge is near the end 
of life.
You should have a replacement 
cartridge in stock.
Duplex Jam
Paper has jammed in the middle of 
2-sided printing.
Clear the jam. Refer to page 8-4.
Fuser Error
There is a problem in the fuser 
unit.
Unplug the power cord and plug it 
back in. If the problem still persists, 
please call for service.
LSU Error
A problem has occurred in the LSU 
(Laser Scanning Unit).
Unplug the power cord and plug it 
back in. If the problem still persists, 
please call for service.
No Developer 
Cartridge
The toner cartridge is not installed. Install the toner cartridge. Refer to 
page 7-5.
No Paper
The recording paper in the paper 
cassette has run out.
Load the recording paper in the 
paper cassette.
Paper Jam 0
Paper has jammed in the paper 
feeding area.
Clear the jam. Refer to page 8-4.
Paper Jam 1
Paper has jammed in the fuser 
area.
Clear the jam. Refer to page 8-4.
Paper Jam 2
Paper has jammed in the paper 
exit area.
Clear the jam.Refer to page 8-4.