Xerox 421 用户手册

4-2

WorkCentre Pro 421 User Guide

Printing Procedure

Before the printing function can be used on the WorkCentre
Pro 421 the machine must be configured and setup on your
network or attached to your workstation via the parallel port.

NOTE: If you require your PC or Workstation configuring to
print to the WorkCentre Pro 421 or experience any difficulties
printing, please contact your System Administrator for
assistance.

Print Drivers

NOTE: You cannot have the 421 PCL driver installed on the
same PC as the GDI driver.

Xerox Network Print Drivers

Once the WorkCentre Pro 421 is configured and connected to
the network, your PC or Workstation can be set up to print
using the customized Xerox Network Printer Drivers which are
provided with the machine.

Xerox GDI Print Driver

A GDI (Graphics Device Interface) printer driver is available for
the WorkCentre Pro 421 copier products.

The GDI printer driver can be downloaded from the ’Drivers’
area of www.xerox.com. and can be used when the
WorkCentre Pro 421 is connected directly to your PC or
Workstation via the parallel port. Installation instructions are
provided within the GDI Printer Driver User Guide which is
contained within the printer driver software.

Quick Pathway

Create the document.

Select [Print] and
[Properties].

Choose the Printer driver
features required.

Select OK.