Xerox 75 用户手册
Product overview
Operator Guide
3-4
DocuTech/DocuPrint 75/90 and DocuPrint 75 MX
Figure 3-4. Trays 1- 4
The Paper Trays hold up to 500 sheets of 20 lb (75 gsm) stock
each. You can adjust the trays to hold many sizes of paper, from
5.5 x 8.5 inches (140 x 216 mm) up to 11 x 17 inches (279 x 432
mm or A3). To handle 12 x 18 inch paper, a tray must be
specially set up. Please contact the Xerox Welcome Centre to
handle this size paper. If you wish to dedicate a tray
permanently to handle this size paper please contact the Xerox
Welcome Center. Refer to the chapter on Paper and Stock for a
listing of acceptable stock and paper sizes, orientations, and
weights.
each. You can adjust the trays to hold many sizes of paper, from
5.5 x 8.5 inches (140 x 216 mm) up to 11 x 17 inches (279 x 432
mm or A3). To handle 12 x 18 inch paper, a tray must be
specially set up. Please contact the Xerox Welcome Centre to
handle this size paper. If you wish to dedicate a tray
permanently to handle this size paper please contact the Xerox
Welcome Center. Refer to the chapter on Paper and Stock for a
listing of acceptable stock and paper sizes, orientations, and
weights.
NOTE: To achieve the maximum copying speed, paper should
be loaded Long Edge Feed in the paper trays whenever
possible.
be loaded Long Edge Feed in the paper trays whenever
possible.
Bypass tray (tray 5)
The Bypass Tray (Tray 5) is an additional paper tray designed for
quick and easy loading of both standard and non-standard
paper. It can physically extend to accommodate different stock
sizes and orientations. You can load a maximum of 50 sheets of
standard weight 20 pound (75 gsm) stock. If using a heavier
stock, fill the tray only to the maximum-fill line.
quick and easy loading of both standard and non-standard
paper. It can physically extend to accommodate different stock
sizes and orientations. You can load a maximum of 50 sheets of
standard weight 20 pound (75 gsm) stock. If using a heavier
stock, fill the tray only to the maximum-fill line.
The Bypass Tray has a capability of 4 to 12 inches (102 to 305
mm); 5.83 to 18 inches (148 x 457 mm).
mm); 5.83 to 18 inches (148 x 457 mm).
The Bypass Tray can also hold non-standard size and weight
paper such as transparencies, labels, covers, index, and bond
paper. The Bypass Tray is shown below in
paper such as transparencies, labels, covers, index, and bond
paper. The Bypass Tray is shown below in
Trays 1 - 4