Xerox 75 用户手册
Operator Guide
Paper and other stock
DocuTech/DocuPrint 75/90 and DocuPrint 75 MX
5-9
The printer performance for new and recycled 8.5 x 11 inches
(216 to 279 mm) or A4 paper for various weights is shown in
(216 to 279 mm) or A4 paper for various weights is shown in
Recommendations for loading special stock
The common uses and the special requirements for the variety of
stock types that the printer can accommodate are shown in
stock types that the printer can accommodate are shown in
Table 5-5. Printer performance for new and recycled plain paper
Paper Weight
Throughput Material 8.5 x 11 in. or A4
Rating
Note
Less than 16 lb or 61 gsm
x
Between 16-20 lb or 61-75 gsm
o
Between 20-32 lb or 75-120 gsm
l
Between 32-110 (index) lb or 120-203 gsm
u
l
Greater than 110 (index) lb or 203 gsm
x
Table 5-6. Recommendations for loading special stock
Stock Type
Common Use
Recommendation
Hole-punched
3 or 4 holes
NOTE: Cannot
Dual Staple due to
hardware
limitations. Dual
stapling drilled
stock will cause
jams in the
finisher.
Dual Staple due to
hardware
limitations. Dual
stapling drilled
stock will cause
jams in the
finisher.
Ringed binders
•
Use long-edge feed paper for
best imaging speed.
best imaging speed.
•
Load with holes on the left in
Trays 5-6.
Trays 5-6.
•
Load with holes on the right in
Trays 1-4.
Trays 1-4.
Perforated
Pages for partial
removal, such as
order forms and
receipts
removal, such as
order forms and
receipts
•
Where possible, load with the
perforations parallel to the
feed direction.
perforations parallel to the
feed direction.